Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users. All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon due to advanced helical gear design. Cruise 10.0 T is a tiller-equipped 48-Volt, 20 horsepower-equivalent outboard perfect for boats up to 10 tons.
Cruise 10.0 T – Benefits:
- High-efficiency outboard with 10,000 W input power, equivalent to the thrust of a 20 HP petrol outboard
- Pair with two Power 48-5000 for maximum performance and accurate range/runtime functionality
- Also compatible with third-party batteries (48-Volt) but careful matching to motor power requirements is needed and addition of cable set part number 1979-00 is required: Power 48-5000 is strongly recommended for best motor performance
- T models are equipped with tiller control with display screen and magnetic kill switch (included in scope of delivery)
- Rugged pylon with integral fin – extra protection when running aground
- Highest-grade seawater-proof aluminum for long service life, even in the harshest conditions
- Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - ships with anode set for fresh and saltwater
Equipment included
Motor with tiller control and integrated on-board computer with display, emergency stop magnetic chip, connection cable set for two Power 48-5000 batteries (total length approx. 4.5 m) incl. main switch and battery terminal screws, 5-pin data cable (5m), standard propeller v22/p10k and sacrificial anodes (Al)
Specs
Input power in watts |
10,000 |
Propulsive power in watts |
5,600 |
Comparable petrol outboards (propulsive power) |
20 HP |
Comparable petrol outboards (thrust) |
25 HP |
Static thrust in lbs* |
≤ 405 |
Maximum overall efficiency in % |
56 |
Integrated battery |
No |
Nominal voltage |
48 |
Total weight in kg |
60.3 (S) 61.8 (L) 63.0 (XL)
|
Shaft length in cm |
38.5 (S) 51.2 (L) 63.9 (XL)
|
Maximum propeller speed in rpm |
1,400 |
Control |
Tiller |
Tilting device |
Electrohydraulic tilt device with overload protection. |
Tilt angle |
+-45° |
Trim device |
Manual, 4-step |
Integrated on-board computer |
Yes |
Stepless forward/reverse drive |
Yes |